Convention | IDSDM indicator code | Description |
|
|
|
E | Not lit | Indicates that the card is missing or is |
Next steps
Follow the procedure listed in After working inside your system
Installing the internal dual SD module
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
1.Ensure that you read the Safety instructions.
2.Follow the procedure listed in Before working inside your system
Steps
1.Locate the IDSDM connector on the system board. To locate the IDSDM connector, see System board connectors
2.Align the connectors on the system board and the dual SD module.
3.Push the dual SD module until it is firmly seated on the system board.
Next steps
1.Install the SD vFlash media card(s).
NOTE: Temporarily label each SD card with its corresponding slot before removal. Replace the SD card(s) into the same slots.
2.Follow the procedure listed in After working inside your system
Network daughter card
Removing the network daughter card
Prerequisites
1.Ensure that you read the Safety instructions.
2.Follow the procedure listed in Before working inside your system.
3.If installed, remove expansion card(s) from the
4.Keep the #1 Phillips screwdriver handy.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
95
