Dell XC730xd Integrated storage controller card, Installing the cable retention bracket

Next steps

1.Replace the cable retention bracket. See Installing the cable retention bracket

2.Follow the procedure listed in After working inside your system.

Related video

http://www.Dell.com/XCSeries/XC730xd/cabling

Installing the cable retention bracket

Prerequisites

1.Ensure that you read the Safety instructions.

2.Follow the procedure listed in Before working inside your system.

3.Remove the cooling shroud.

4.Remove the PCIe card holder.

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

Steps

1.Align the cable retention bracket with the alignment pins on the chassis.

2.Slide the cable retention bracket along the chassis wall until the tab clicks and locks the slots.

3.Place all cables to be routed in the cable retention bracket.

Next steps

1.Install the PCIe card holder.

2.Install the cooling shroud.

3.Follow the procedure listed in After working inside your system.

Integrated storage controller card

Your system includes a dedicated expansion-card slot on the system board for an integrated controller card. The integrated storage controller card provides the integrated storage subsystem for your system’s internal hard drives. The controller supports SAS and SATA hard drives as supported by the version of the storage controller included with your system.

Removing the integrated storage controller card

Prerequisites

1.Ensure that you read the Safety instructions.

2.Follow the procedure listed in Before working inside your system.

77