Figure 19. Installing the memory module

1. memory module

2. alignment key

3.memory-module socket ejector (2)

When the memory module is properly seated in the socket, the levers on the memory module socket align with the levers on the other sockets that have memory modules installed.

5.Repeat steps 1 to 4 of this procedure to install the remaining memory modules.

Next steps

1.Install the cooling shroud.

2.Follow the procedure listed in After working inside your system.

3.Press F2 to enter System Setup, and check the System Memory setting.

The system should have already changed the value to reflect the installed memory.

4.If the value is incorrect, one or more of the memory modules may not be installed properly. Repeat step 4 through step 5 of this procedure, checking to ensure that the memory modules are firmly seated in their sockets.

5.Run the system memory test in the system diagnostics.

SATADOM

A SATADOM is a disk-on-module (DOM) form factor with an incorporated standard SATA data connection. By default, the SATADOM comes with a power cable installed and is set in a Read/Write position.

The SATADOM uses an onboard SATA controller and does not require an additional controller.

With Nutanix, you can locate the boot device on a separate controller from the data drives, which improves system disk performance.

63

Page 63
Image 63
Dell XC730xd owner manual Satadom