Dell XC730xd owner manual Nic

Expansion Bus

	NOTE: To use slots 1 through 4, both the
	processors must be installed.
	(Slot 5) One full-height, full-length x8 link
Riser 3 (default)	(Slot 6) One full-height, full-length x8 link
Memory
Architecture	1333 MT/s, 1600 MT/s, 1866 MT/s or 2133 MT/s
	DDR4 registered, load-reduced Error Correcting
	Code (ECC) DIMMs
	Support for advanced ECC or memory optimized
	operation
Memory module sockets	Twenty-four 288-pin
Memory module capacities
LRDIMMs	32 GB quad-ranked
RDIMMs	8 GB or 16 GB dual-ranked
Minimum RAM	64 GB with a dual processor
Maximum RAM	Up to 768 GB with a dual processor
	Up to 384 GB with a single processor
Drives
Hard drives
Twelve hard-drive systems	Up to twelve 3.5 inch drives
Twenty-four hard-drive systems	Up to twenty-four drives
Connectors
Back
NIC	Four 1 Gbps, two 1 Gbps plus two 10 Gbps, or four
	10 Gbps
Serial	9-pin, DTE, 16550-compatible
USB	Two 4-pin, USB 3.0-compliant
Video	15-pin VGA
External vFlash card	One flash memory card slot with iDRAC8
	Enterprise card
	NOTE: The card slot is available for use only if
	the iDRAC8 Enterprise license is installed on
	your system.

151