http://www.Dell.com/XCSeries/XC730xd/IDSDM
Installing an internal SD card
Prerequisites
1.Ensure that you read the Safety instructions.
2.Follow the procedure listed in Before working inside your system.
3.If installed, remove the cooling shroud.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
NOTE: To use an SD card with your system, ensure that the Internal SD Card Port is enabled in the System Setup.
Steps
1.Locate the SD card connector on the internal dual SD module. Orient the SD card appropriately and insert the
NOTE: The slot is keyed to ensure of correct card insertion correct insertion of the card.
2.Press the card into the card slot to lock it into place.
Next steps
Follow the procedure listed in After working inside your system.
1.If removed, replace the cooling shroud.
2.Follow the procedure listed in After working inside your system.
Removing the internal dual SD module
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
1.Ensure that you read the Safety instructions.
2.Follow the procedure listed in Before working inside your system.
Steps
1.Locate the internal dual SD module on the system board.
2.If installed, remove the SD cards.
3.Hold the plastic pull tab and pull the dual SD module out of the system board.
93
