Host Name
MAC Address
Static IP Address
Subnet Mask
Default Gateway Address
MAC Address
DNS Address
DNS Address 1,2 & 3
Enable Dual‐WAN Access
User ID
Password
PPTP Gateway
Connection ID
MTU
BEZEQ‐ISRAEL
Connection Type
Idle Time Out
Enter the host name of your computer here If required.
For some applications, you may need to designate a specific MAC address for the router. Please enter the MAC address here. If you are connecting the router to a computer, press “Clone Mac” to automatically enter your computer’s MAC address. Input the IP address assigned by your ISP here. Input the subnet mask assigned by your ISP here. Input the default gateway assigned by your ISP here. Some ISPs may call this “Default Route”.
If your ISP filters access by MAC addresses, enter your computer’s MAC address here. Click “Clone MAC” to automatically enter your computer’s MAC address.
Select “Obtain an IP address automatically” or “Use the following IP address”. Check with your ISP if you are unsure.
Enter the DNS address(es) assigned by your ISP here.
Enable/disable dual WAN access. When you enable dual WAN access, select an IGMP source and enter a “Host Name” and “MAC Address”.
Input the user name assigned by your ISP here. Input the password assigned by your ISP here. Input the PPTP gateway assigned by your ISP here. Specify a reference name/ID for the connection. Enter the maximum transmission unit (MTU) value of your network connection. The default value is 1392.
Check the “Enable” box if you are using BEZEQ network services (Israel users only).
Specify a connection type:
1.“Continuous”: Connected all the time.
2.“Connect on Demand”: Connect when you initiate an Internet connection.
3.“Manual”: Connect/disconnect manually using the “Connect” and “Disconnect” buttons.
Specify the amount of time the router waits before
36
