Edimax Technology BR-6228NC V2 Enable Static Routing, Destination LAN IP, Subnet Mask, Hop Count

Enable Static Routing	Check/uncheck the box to enable/disable
	static routing.
Destination LAN IP	Enter the destination network’s IP address.
Subnet Mask	Enter the subnet mask of the destination
	network.
Default Gateway	Enter the default gateway of the destination
	network.
Hop Count	Enter the hop count (the distance between
	destination network and this broadband
	router) here.
Interface	Enter the interface which leads to
	destination network.
Add	Add the route to the current static routing
	table.
Clear	Clear all fields.

III‐3‐8‐2. Port Forwarding

This function allows you to redirect a single port or consecutive ports of an Internet IP address to the same port of a local IP address. The port number(s) of the Internet IP address and local IP address must be the same.

If the port number of the Internet IP address and local IP address is different, please use the “Virtual Server” function instead.

71