Edimax Technology BR-6228NC V2 manual III‐3‐4. LAN, IP Address, Subnet Mask, 802.1d Spanning, Tree

III‐3‐4. LAN

You can configure your Local Area Network (LAN) on this page. You can enable the router to dynamically allocate IP addresses to your LAN clients, and you can

modify the IP address of the device. The device’s default IP address is 192.168.2.1.

You can access the browser based configuration interface using the device’s IP address instead of using the URL http://edimax.setup.

IP Address	Specify the IP address here. This IP address
	will be assigned to the BR‐6228nS V2/nC V2
	and will replace the default IP address.
Subnet Mask	Specify a subnet mask. The default value is
	255.255.255.0
802.1d Spanning	Select “Enable” or “Disable” to enable/disable
Tree	802.1d Spanning Tree. This creates a tree of
	connected layer‐2 bridges (typically Ethernet
	switches) within a mesh network, and
	disables those links that are not part of the
	tree, leaving a single active path between any
	two network nodes.
DHCP Server	Enable or disable the DHCP server.
Lease Time	Select a lease time for the DHCP leases here.
	The DHCP client will obtain a new IP address
	after the period expires. If there are less than
	30 computers connected to the router, you
	can select “Forever”.

Your device’s DHCP server automatically assigns IP addresses to computers on its network, between a defined range of numbers.

42