Emerson 3051N manual Date

Rosemount 3051N

Reference Manual

00809-0100-4808, Rev CA June 2008

ROSEMOUNT 3051N 4-20 MA/HART OUTPUT SMART PRESSURE TRANSMITTERS TYPICAL CONFIGURATION DATA WORKSHEET

CONFIGURATION DATA SHEET

Software Tag: ________________

OUTPUT INFORMATION: (Software Selectable)

4 mA =	____________		0★			Key to Symbols
20 mA =	____________		Upper Range Limit ★			★ = Typical Factory Default Value(1)
Pressure Units =  inH O★(2)			 psi★(3)		 Pa	 ftH O
	2					2
	 inHg		 bar		 kPa	 g/cm2
	 mbar		 Torr		 mmH2O	 inH2O at 4 °C
	 Atm		 kg/cm2		 mmHg	 mmH2O at 4 °C
Output =	 Linear★		 Square Root (For DP transmitters only)
Damping(4) =	 0.00 seconds		 0.05 seconds		 0.10 seconds	 0.20 seconds	 0.40 seconds★
	 0.80 seconds		 1.60 seconds		 3.20 seconds	 6.4 seconds	 12.8 seconds
	 25.6 seconds
TRANSMITTER INFORMATION: (Software Selectable)
Descriptor:	________________________________
		(16 characters)
Message:	________________________________________________________________
Date: □ □/□ □ □/□ □					(32 characters)
	Day	Month	Year
Local Span and Zero:		 Enabled★		 Disabled

LCD METER CONFIGURATION (Software Adjustable – M5 or M6 option must be specified in Rosemount number)

Meter Display Type:
 Eng. Units only	 Alternate Eng. Units & % of Range ★
 % of Range only	 Alternate Eng. Units & Custom Display

Custom Display only  Alternate % of Range & Custom Display Custom Display Configuration: (must be filled out if Custom Display is selected as meter type)

Decimal Point Position (fixed)		X X X X X
Indicate decimal point location
Enter Lower Range Value (Decimal point must be in the same position as specified above.)
(circle sign)	+	– □□□□□	Default is +000.00
Enter Upper Range Value (Decimal point must be in the same position as specified above.)
(circle sign)	+	– □□□□□	Default is +100.00
Custom Units
Available characters: A-Z, 0-9, /, *, %, (blank)
		□ □ □ □ □	Default is %RNGE

Custom Display Transfer Function (Independent of Analog Output)

Linear★

Square Root

(1)Default values may be different outside the U.S.A. Consult your Rosemount Representative for details.

(2)inH20 for ND/NG Ranges 0, 1, 2, and 3

(3)psi for ND/NG Ranges 4 and 5, all NA ranges.

(4)Rosemount 3051NDO default damping is 3.2 seconds. Rosemount 3051ND1, with calibrations below 2.5 in H2O (0,62 kPa) have damping set at 3.2 seconds.

5-12