Emerson manual Transmitter Functions, OVERVIEW SAFETY MESSAGES Warnings, Rosemount 3051N

Reference Manual

00809-0100-4808, Rev CA June 2008

Rosemount 3051N

Section 2 Transmitter Functions

OVERVIEW

SAFETY MESSAGES

Warnings

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-1 Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-1 Failure Mode Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-2 Review Configuration Data . . . . . . . . . . . . . . . . . . . . . . . . page 2-7 Check Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-7 Basic Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-8 Detailed Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-12 Diagnostics and Service . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-12 Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-13

This section contains information on commissioning and operating Rosemount 3051N Smart Pressure Transmitters. Tasks that should be performed on the bench prior to installation are explained in this section.

When the HART Communicator is referenced, it refers to either the Rosemount 275 or Rosemount 375 as documented in Rosemount Report D2001019.

For your convenience, typical HART Communicator fast key sequences are listed for most software functions. These fast key sequences are the same for both the Rosemount 275 and Rosemount 375 Communicators. If you are unfamiliar with the communicator or how to follow fast key sequences, please refer to Appendix A for communicator operations.

A typical transmitter software configuration data worksheet is provided in Section 5.

Procedures and instructions in this section may require special precautions to ensure the safety of the personnel performing the operations. Information that raises potential safety issues is indicated by a warning symbol (). Refer to the following safety messages before performing an operation preceded by this symbol.

Explosions can result in death or serious injury.

•Do not remove the transmitter covers in explosive environments when the circuit is alive.

www.rosemountnuclear.com