Emerson manual Rosemount 3051N, Reference Manual, Value out of range

Rosemount 3051N

Reference Manual

00809-0100-4808, Rev CA June 2008

Message	Description
Value out of range	The user-entered value is either not within the range for the
	given type and size of variable or not within the min/max
	specified by the device.
<message>	Either a read/write command indicates too few data bytes
occurred	received, transmitter fault, invalid response code, invalid
reading/writing	response command, invalid reply data field, or failed pre- or
<variable label>	post-read method; or a response code of any class other than
	SUCCESS is returned reading a particular variable.
<variable label> has	A variable related to this variable has been edited. Send
an unknown value.	related variable to the device before editing this variable.
Unit must be sent
before editing, or
invalid data will be
sent.

A-18