MIB DescriptioncgmSys

Table 5-7 Event Codes and Severity (continued)

Code

Severity

Description

 

 

 

genSysError (1000)

Warning

A general system error.

 

 

For debugging only.

 

 

 

genSysErrorC (1001)

*Critical

A general critical system error.

 

 

For debugging only.

 

 

 

startupComplete (130)

Event

Indicates that the clock module has started and is

 

 

ready for operation.

 

 

 

resetRequest (131)

Event

Indication that the module is being resetted.

 

 

 

invalidBootOptions (140)

Warning

Invalid parameters were given for the cgmBootString.

 

 

 

The following table describes the elements of the cgmSys MIB branch

(OID:.1.3.6.1.4.1.3656.8152.1.3). They provide general control and status operations for the event log.

Table 5-8 cgmSys Objects

 

OID

MIB Object

Description

Access

 

 

 

 

 

 

.1.3.10

cgmSysEventLogSize

The maximum number of events the event log can hold

r

 

 

 

(about 80000).

 

 

 

 

 

 

 

.1.3.11

cgmSysEventLogCount

The current number of events present in the event log.

r

 

 

 

 

 

 

.1.3.12

cgmSysEventLogClear

Clears the event log.

r/w

 

 

 

When set to 0, events which have not been accessed

 

 

 

 

will be cleared (an event is marked as "accessed" if its

 

 

 

 

timestamp cgmEventTime is read).

 

 

 

 

If set to 1, all events are cleared regardless whether

 

 

 

 

they have been accessed or not. This is not

 

 

 

 

recommended since it may cause events to get lost

 

 

 

 

while the log is about to be cleared.

 

 

 

 

 

 

 

.1.3.13

cgmSysEventLogLevel

Specifies up to which severity events shall be placed

r/w

 

 

 

into the event log:

 

 

 

 

0

- No events are logged

 

 

 

 

1

- Only critical events are logged

 

 

 

 

2

- Critical events and warnings are logged

 

 

 

 

3

- Critical events, warning and events are logged

 

 

 

 

4

- Everything is logged

 

 

 

 

Default value is (3).

 

 

 

 

 

 

 

.1.3.14

cgmSysEventTrapLevel

Specifies up to which severity new event log entries

r/w

 

 

 

are posted as a trap (using the cgmLogEvent object).

 

 

 

 

0

- No events are posted

 

 

 

 

1

- Only critical events are posted

 

 

 

 

2

- Critical events and warnings are posted

 

 

 

 

3

- Critical events, warning and events are posted

 

 

 

 

4

- Everything is posted

 

 

 

 

Default value is (3).

 

 

 

 

 

 

 

 

 

 

 

 

 

58

 

 

 

PMC-CGM Installation and Use (6806800D53C)

Page 58
Image 58
Emerson PMC-CGM manual CgmSys Objects