Emerson PMC-CGM manual MIB Description CgmClkDist

MIB Description cgmClkDist

Table 5-8 cgmSys Objects (continued)

OID	MIB Object	Description	Access
.1.3.33	cgmBootString	The boot configuration data consists of a list of	r/w
		parameter=value pairs separated by spaces. The
		following parameters/values are defined:
		(eethaddr)=<ip-address>[:netmask] Defines the
		module’s IP address/netmask. This is overwritten by
		dynamic configuration options (see below). Default
		netmask is ffffff00.
		(hhosttrapDest)=<ip-address> Defines the default
		address for the cgmTrapDestination element.
		(ggatewayip)=<ip-address> Defines the default
		gateway address.
		(mmode)=<flag>[,<flag>[,...]] Defines various
		configuration flags. <flag> may be one of
		-ipmi: Obtain IP/gateway address via IPMI (from shelf
		manager).
		-dhcp: Configure network interfaces via DHCP.
		-static: Use static network setup as defined here.
		When obtaining network address via IPMI or DHCP,
		and the host address (h=statement) is on the same
		subnet as the statically configured IP address
		(e=statement), the network part of the host address is
		adjusted according to the dynamically obtained IP
		address.
		Setting this element has no immediate effect,
		modifications are applied at the next reboot.

5.4cgmClkDist

The cgmClkDist branch contains the following information which is used for controlling clock distribution and measurement:

zcgmDmClkTable - not supported for the PMC-CGM.

zcgmFrqMonTable - not supported for the PMC-CGM.

zVarious MIB objects that are described in Table 5-5 on page 53.

For details on how to use these MIB objects refer to Configure the Reference Clock on page 41.

60 PMC-CGM Installation and Use (6806800D53C)