cgmSys | MIB Description |
|
|
Table 5-8 cgmSys Objects (continued)
OID | MIB Object | Description | Access |
|
|
|
|
.1.3.23 | cgmSysHwVersion | The hardware revision of the | r |
|
|
|
|
.1.3.24 | cgmSysSwVersion | The firmware revision of the board in the format "x.y.z" | r |
|
| which corresponds to "<major revision>.<minor |
|
|
| revision>.<build count>. |
|
|
|
|
|
.1.3.25 | cgmRestartCmd | Restarts the module when set to 1. The operation is | r/w |
|
| ignored while a firmware update is ongoing. |
|
|
| After a successful firmware update this will start the |
|
|
| new firmware. |
|
|
|
|
|
.1.3.26 | cgmFwUpdateHost | The IP address of the TFTP server where the new | r/w |
|
| firmware image is located. |
|
|
|
|
|
.1.3.27 | cgmFwUpdateFile | The name of the firmware update image to be | r/w |
|
| downloaded from the TFTP server. |
|
|
|
|
|
.1.3.28 | cgmFwUpdateMd5 | The MD5 checksum of the firmware image. This | r/w |
|
| checksum is verified after downloading the TFTP |
|
|
| image and after programming it into the boot flash. |
|
|
|
|
|
.1.3.29 | cgmFwUpdateOption | Controls how to handle revision numbers of the old and | r/w |
|
| the new firmware image: |
|
|
| If "newer" (0) only images with a version number higher |
|
|
| than the current one can be programmed. |
|
|
| If "newerOrSame" (1), images with the same or a |
|
|
| higher version number can be programmed. |
|
|
| If "allowDowngrade" (2), firmware downgrade is |
|
|
| possible. |
|
|
| If "noVersionCheck" (3), no version check is performed |
|
|
| at all. This allows installing images which do not |
|
|
| contain version information. |
|
|
| Default value is (0). |
|
|
|
|
|
.1.3.30 | cgmFwUpdateStart | A value of 1 initiates the firmware update. The value | r/w |
|
| remains 1 as long as the update is ongoing. |
|
|
|
|
|
.1.3.31 | cgmSysTelnetEnable | Enables(1) / disables (0) a telnet server on the module. | r/w |
|
| Used only for debugging purposes. |
|
|
| Default value is (1). |
|
|
|
|
|
.1.3.32 | cgmTrapDestination | IP address where to send traps to. | r/w |
|
| Default value is the host address specified in the boot |
|
|
| parameters of the |
|
|
|
|
|
| 59 |
