Removing a Math Coprocessor
If you need to remove a math coprocessor from your computer, contact your dealer for assistance. You need a special extracting tool to remove the coprocessor without damaging it. Do not attempt to remove it without this tool; you can easily damage it.
Follow the steps described earlier in this chapter to remove the subassembly. Then remove the coprocessor with the tool and replace the subassembly and the computer’s cover.
After you remove the coprocessor, run the SETUP program to configure your system for use without it. See Chapter 2 for instructions.
Replacing the Subassembly
Follow the steps below to replace the subassembly inside your computer:
1.Notice that there are four mounting slots on the back of the subassembly: two in the upper corners and two in the lower corners.
lower slots
Installing and Removing Options |