3.Type the following command and press Enter to create a utility file directory on your hard disk (if you do not already have one):
MKDIR C:\UTIL
You can name the directory something other than UTIL; just substitute the directory name you choose in the rest of the steps in this section.
4.Insert the Reference diskette in drive A.
5.Type the following command and press Enter for each utility file you want to copy to your utility directory:
COPY A:fi1enane C:\UTIL
where filename is one of the following:
VGAMODE.COM
SETVGA.COM
SNOOZE.COM
6.After copying the utility files you want, remove the Reference diskette from drive A.
Once the files are on your hard disk, it is a good idea to include a pathname to your utility directory in the AUTOEXEC.BAT file, as described below.