How to Use This Appendix
The instructions in this appendix describe how to install and remove optional Epson diskette and hard disk drives. All drives sold by Epson for the Equity 286 PLUS are qualified and recommended for use in this system. Your drive may look a bit different from the one illustrated in this appendix, but you install it the same way.
If you are installing or removing a
Each section describes a part of the process you may need to perform. Here are the guidelines:
Ll Before you begin any of the procedures described in this appendix, follow the steps in Chapter 5 to remove the computer’s cover.
DIf you are removing your only hard disk drive, see “Removing a Hard Disk from the Vertical Position” on page
CI If you are installing a hard disk drive or removing one and leaving another in the computer, follow the steps under “Setting the Hard Disk Drive Jumpers” on page
0If you are installing or removing a diskette drive and there is a hard disk drive installed in the vertical mounting position, see “Removing a Hard Disk from the Vertical Position” on page
0If you are installing or removing a diskette drive and there is no hard disk drive installed in the vertical mounting position, see “Installing or Removing a Disk Drive in the Horizontal Position” on page
Additional instructions in each section tell you which steps to perform next.
Installing and Removing Disk Drives