Position the power supply cable connector so that the notched comers on the connector line up with the notched comers of the power supply socket on your drive.
notched corners
notched corners
Make sure the holes fit over all the pins and then push the connector onto the pins.
Caution
If you do not correctly align the holes with the pins, you could severely damage your drive when you push in the connector.
If you do not need to reinstall a vertically mounted hard disk drive, see “Replacing the Subassembly” on page
If you just connected the power supply cable to your vertically mounted hard disk drive, perform step 8 again to connect the power supply cable to the drive you just installed in the horizontal drive bay. Then see “Replacing the Drive on the Subassembly” on the next page for instructions on reinstalling the vertically mounted drive.