Bad track list
Entering the bad track list is optional. The program displays the following prompt for the bad track list:
Mark bad tracks (Y/N) ? N
You do not need to enter a bad track list for the hard disk that comes with the Equity 286 PLUS. Press N, if necessary, and then press Enter.
If you press Y and then Enter, you see the following submenu:
Add an entry
Revise an entry
Delete an entry
Clear bad track list
Save and Exit
Use ” or “ to highlight a menu option and press Enter. Then enter the correct track information. When the bad track list is correct, highlight Save and Exit and press Enter.
Note
When you run the Media analysis test, the program automatically marks the bad tracks when it formats the hard disk.
Start and end cylinder numbers
The program displays the following prompts for the starting and ending cylinder numbers:
Start cylinder number 0 ?
End cylinder number | nnn ? |
Performing System Diagnostics |