3.Turn on the monitor, printer, and any other peripheral devices connected to the computer.
4.To turn on the computer, press the power button located on the right side of the front panel, as shown below.
power button
The power indicator next to the button lights up. After a few seconds, the computer counts the amount of memory in your computer, and then performs a diagnostic self test. This is a series of checks the computer completes each time you turn it on to make sure everything is working correctly.
If necessary, use the controls on your monitor to adjust the brightness and contrast until characters on the screen are clear and at a comfortable level of intensity. If your monitor has horizontal and vertical hold controls, you may need to use them to stabilize the display.
Note
If you or your dealer have made a major change to your system, such as adding a disk drive, you may need to wait several minutes for your computer to complete
Setting Up Your System |