Epson 286 PLUS 7

Epson® Equity® 286 PLUS

User’s Guide Correction

Please note that the setting of jumper J6 on your computer’s main system board, described on page 5-7, should be as follows:

*Factory setting

Also note that the jumper settings described on page D-6 should be reversed. To disable the password function, set jumper J6 to position B. To enable the password function, set jumper J6 to position A.

On pages 5-13 through 5-17, the illustrations and descriptions of your computer’s option slots indicate that the 8-bit slot is slot number 1 and that the 16-bit slots are numbers 2 through 4. The 8-bit option slot is actually slot number 4 and the 16-bit slots are slot numbers 1 through 3. Please keep this in mind as you read these pages.

Epson is a registered trademark of Seiko Epson Corporation.

Equity is a registered trademark of Epson America, Inc.