Accessing Your Current Password
If you have forgotten your current password and cannot use your computer, follow these steps:
1.Turn off the computer and follow the instructions under “Changing the Jumper Settings” in Chapter 5 to disable the password function by setting jumper J6 to position A.
Caution
Be sure to ground yourself on the back inside panel of the computer before touching any of the interior components. Always replace the cover on the computer before you turn it on again.
2. Turn on the computer. You do not see the Password : prompt.
3.When the Press <Del> to start SETUP
prompt appears, press Del.
4.Highlight Run SETUP and press Enter. You see the SETUP menu. Your current password is displayed near the bottom of the screen.
If you still want to use the same password, be sure to remember it or write it down. Then go to step 6.
5.If you want to change or delete your current password, follow the instructions under “Setting the Password” in Chapter 2. Be sure to save your SETUP information when you exit the program.
6.Turn off the computer and follow the instructions under “Changing the Jumper Settings” in Chapter 5 to enable the password function by setting jumper J6 to position B.