Selecting Diagnostic Tests

To start a single test, press ’ or ‘ to highlight the test category on the Main menu. Then press ” or “ to highlight the particular test in the submenu and press Enter to run it.

When a test has been completed, you see this prompt:

Press <Enter> to return to Main menu.

Selecting Multiple Tests

To select several tests at one time, highlight each test you want to perform and press F3. To cancel a selection, highlight the test and press F3 again.

You can press F4 to select all tests for all devices, and press F5 to cancel all selections.

To run the selected group of tests, press F6. The program highlights each test name as it runs the test.

You cannot run certain tests along with other tests. The following table lists the tests that must be run individually.

C-8 Performing System Diagnostics