Changing the Jumper Settings

If you change your computer’s configuration or need to alter the way it operates, you may need to change a jumper setting inside the computer.

A jumper is a small electrical connector that controls one of the computer’s functions. The jumper settings in your computer are preset at the factory; however, you can alter the following functions by changing the standard settings:

Cl Set the computer to use an 8 or 10 MHz math coprocessor

CI Enable or disable the password function

0Set the computer to use a color or monochrome monitor CI Enable or disable the built-in mouse connector

0Enable or disable the built-in VGA display adapter.

If you need to change any jumper settings, follow the instructions in this section.

Installing and Removing Options 5-5