Destructive tests | Nondestructive tests |
|
|
Format | Performance |
Media analysis | Seek |
Force bad tracks | Read/verify |
| Check test cylinder |
|
|
|
|
Caution
You should not run any of the destructive tests on an SCSI type hard disk drive.
Before performing any destructive test, the program displays the following messages:
W A R N I N G
All data on hard disk you have specified may be lost...
Do you still want to continue (Y/N)?
Press Y and Enter to begin the test. Press N and Enter to stop the operation.
Hard Disk ParametersThe program may ask for the following parameters:
Disk drive identifier
Disk drive type
Interleave factor
Bad track list
Start cylinder number
End cylinder number
Start head number
End head number
Each parameter is described below.
Performing System Diagnostics |