Press Enter after typing each number. If you enter an invalid number, the computer beeps and does not go on to the next parameter. Check your drive documentation and try again. You do not enter a value for Size ; SETUP does this automatically based on the other numbers you have provided.

Setting the Primary Display Type

This option lets you define the type of adapter you are using in your computer for your primary display device:

0 VGA or EGA

QColor 80 x 25 0 Monochrome 0 Color 40 X 25.

Note that this option defines the display adapter (the built-in video port or optional video interface card in your computer), not the monitor connected to it.

If you have connected your monitor to the computer’s built-in VGA port, select VGA or EGA. Otherwise, follow these guidelines to select the correct adapter type:

0If you have a color graphics adapter (CGA) or a multi-mode graphics adapter (MGA) attached to an RGB (color) monitor, select Co1or 8 0 x2 5. (Also be sure to set the color/mono switch on the MGA card to color.)

Cl If you have a monochrome display adapter (MDA) , an MGA, or a Hercules MGA attached to a monochrome monitor, choose Monochrome. (Also remember to set the color/mono switch on the MGA card to mono.)

2-8 Running the Setup Program