Extron electronic MTPX Plus Series manual Command Ascii command Response Additional, Description

Programmer’s Guide, cont’d

Command/response table for SIS commands

Command	ASCII command	Response	Additional
	(host to switcher)	(switcher to host)	description

Create ties

N• Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02&003*003%4*8$.

•The quick multiple tie and tie input to all output commands activate all I/O switches simultaneously.

•The matrix switchers support 1-, 2-, and 3-digit numeric entries (1*1, 02*02, or 001*001).

NThe & tie command for RGB and the % tie command for video can be used interchangeably on the matrix switchers.

Tie input X!to output X@,	X!*X@!	OutX@•InX!•All]
video (V) and audio (A)
Example:	1*3!	Out03•In01•All]

Tie input X!‘s video and audio to output X@.

Tie input 1 video and audio to output 3.

Tie input X!to output X@,	X!*X@&
RGB (video) only
Example	10*4&
(see 2nd Note, above):
Tie input X!to output X@,	X!*X@%
video only

OutX@•InX!•RGB]	Audio breakaway.
Out04•In10•RGB]	Tie input 10 RGB to output 4.
OutX@•InX!•Vid]	Audio breakaway.

Example	7*5%
(see 2nd Note, above):
Tie input X!to output X@,	X!*X@$
audio only

Out05•In07•Vid]	Tie input 7 video to output 5.
OutX@•InX!•Aud]	Audio breakaway.

Example:	12*4$	Out04•In12•Aud]	Tie input 12 audio to output 4.
Quick multiple tie	E+QX!*X@!...X!*X@$}	Qik]
Example:	E+Q3*4!3*5%3*6$}	Qik]	Tie input 3 video and audio
			to output 4, tie input 3 video
			to output 5, and tie input 3
			audio to output 6.
Tie input to all outputs,	X!*!	InX!•All]
video and audio
Example:	5*!	In05•All]	Tie input 5 video and audio
			to all outputs.
Tie input to all outputs,	X!*&	InX!•RGB]	Audio breakaway.
RGB (video) only
Example	8*&	In08•RGB]	Tie input 8 RGB to all
(see 2nd Note, above):			outputs.
Tie input to all outputs,	X!*%	InX!•Vid]	Audio breakaway.
video only
Example	10*%	In10•Vid]	Tie input 10 video to all
(see 2nd Note, above):			outputs.
Tie input to all outputs,	X!*$	InX!•Aud]	Audio breakaway.
audio only

Read ties

NThe & read tie command for RGB and the % read tie command for video can be used interchangeably on the matrix

switchers.
Read RGB (video) output	X@&	X!]
tie
Read video output tie	X@%	X!]

RGB input X!is tied to output X@.

Video input X!is tied to output X@.

Read audio output tie	X@$	X!]	Audio input X!is tied to
			output X@.
N X!= Input number		00 – (maximum number of inputs for your model) (00 = untied)
X@= Output number		01 – (maximum number of outputs for your model)

4-10 MTPX Plus Twisted Pair Matrix Switchers • Programmer’s Guide