Extron electronic MTPX Plus Series manual Changing the output volume level, 16 - Volume drop box

Changing the output volume level

Users can set each local audio output’s volume level through a range of zero steps

of attenuation (full attenuation, minimum volume) to 64 steps of attenuation (no attenuation, full volume) from the I/O Settings page.

Change an output’s audio volume setting as follows:

1. Click the desired output’s Volume drop box. A drop-down scroll box appears (figure 6-16).

Figure 6-16 — Volume drop box

2. Click and drag the slider or click on the scroll up button or the scroll down button until the desired value is visible.

NAs an alternative to steps 1 and 2, or to listen to the audio as you make adjustments, click on the up button or down button.

NThe table on the next page defines the value of each audio volume step.

Muting and unmuting an audio or RS-232 output

Mute and unmute an audio or RS-232 output by clicking the associated Audio Mute button. Each click toggles the mute status.

MTPX Plus Twisted Pair Matrix Switchers • HTML Operation 6-19