Extron electronic MTPX Plus Series manual White Not displayed for the Mtpx Plus

Hardware status — Provides an overall view of the status of the matrix switcher, including the power supply voltages, the temperature status, the Remote RS-232/RS-422 port configuration, and the installed and updated firmware status (figure 5-17).

Green — Proper operation.

Red — Component has failed.

White — Not displayed for the MTPX Plus.

Figure 5-17 — Status window

Name presets — Allows you to assign a name to each of the 32 memory presets.

NPreset names are limited to 12 upper- and lower-case alphanumeric characters,

space, and the _ and / characters. The following characters are invalid in

preset names: + ~ , @ = ‘ [ ] { } < > ’ “ ; : \ and ?.

Show RS-232 strings — Displays the RS-232 commands that are used by the current configuration. You can refer to these for SIS programming.

I/O Group settings — Displays the inputs/outputs groups window, which allows you to assign inputs and outputs to any one of four groups (or no group).

Initialize — Initializes and clears any or all of the following: ties, presets, audio configuration, preset names, icon names, and icons.

Audio-input Configuration selection

Displays the audio gain level setting for a single input or for all inputs

and allows you to change it. The level is expressed as the magnitude (number of decibels) and polarity (positive, gain or negative, attenuation) of the audio adjustment.

MTPX Plus Twisted Pair Matrix Switchers • Matrix Software 5-21