Extron electronic MTPX Plus Series Programmer’s Guide, cont’d, Command, ASCII command, Response

Programmer’s Guide, cont’d

Command/response table for SIS commands (continued)

Command	ASCII command	Response	Additional
	(host to switcher)	(switcher to host)	description
Information requests
Information request	I	VX2^XX2&•AX2^XX2&]	V (video) matrix size•
			A (audio) matrix size
Request part number	N	X2*]	See appendix B for part
			numbers.

NThere are up to three separate sets of Extron firmware on which the switcher can report: the controller firmware, which is the overall control firmware; the Ethernet protocol firmware, which handles the Ethernet interface; and the latest optional Extron firmware update, which is available at www.extron.com.

Query controller firmware			Q	X2(]
version
Example:			Q	1.23]		The factory-installed
						controller firmware version
						is 1.23 (sample value only).
Query controller firmware			0Q	X2(-X3)-X3)]		Provide a detailed status of
version (verbose)						the MTPX Plus controller
						firmware and any firmware
						upgrade. The firmware that
						is running is marked by
						an asterisk (*). A caret (^)
						indicates that the firmware
						has a bad checksum or an
						invalid load. ?.?? indicates
						that firmware is not loaded.
Response description: Ethernet protocol firmware version-controller firmware version-updated firmware version]
Example:			0q
		Description		* indicates the version running		Upload date and time
	1.23-1.00(1.06-16x16 Series -Tue, 04 Dec 2007 00:00:00 GMT)-1.00*(1.06-16x16 Series					-Thu, 27 Dec 2006 16:39:21 GMT)
Ethernet protocol			MTPX firmware version		Updated firmware version
firmware
Request system status			S	X3!•X3!•X3!•X3!•X3!•X3@•X3#•X3#]

Response description: +3.3V•+5V•-5V•+12V•-12V•temperature (degrees fahrenheit)•Fan 1 speed•Fan 2 speed•Fan 3 speed]

NFans are numbered 1, 2, and 3, from rear to front.

Example:			+12V power system at 11.62V
		3.28•+4.98•-5.01•+11.52•-12.35•+086.80•03590•03668•03627
			3.3V power system at 3.28V
				Fan 1 (rear) rotating at 3590 RPM
N X2^= Number of inputs		8, 16, or 32
X2&= Number of outputs		8, 16, or 32
X2*	= Part number	60-nnn-nn
X2(= Firmware version number to second decimal place (x.xx)
X3)	= Verbose firmware version-description-upload date/time
X3!= Voltage		Positive or negative voltage and magnitude
X3@= Temperature		Degrees Fahrenheit
X3#= Fan speed		RPM

4-22 MTPX Plus Twisted Pair Matrix Switchers • Programmer’s Guide