Extron electronic MTPX Plus Series manual Viewing a configuration

Viewing a configuration

The current configuration can be viewed using the front panel buttons. The View-onlymode prevents inadvertent changes to the current configuration. View-onlymode also provides a way to mute audio or RS-232 outputs

(see “Muting and unmuting audio/RS-232 outputs” on page 3-32. View the current configuration as follows:

1.	Press the Esc button to clear any input button indications, output button
	indications, or control button indications that may be on.
2.	Press and release the View button. All of the buttons light for outputs that are
	not tied as follows:
	• Amber: No tied video or audio input
	• Green: No tied video input
	• Red: No tied audio input
3.	Select video, audio, or both to view by pressing the Video button and/or the
	Audio button.
4.	Select the desired input or output(s) whose ties you wish to view by pressing
	the input and output buttons.

N• When you enter View-onlymode, the output buttons light for all outputs without ties. Likewise, when you press an output button for which there are no ties, the output buttons light for all outputs without ties.

•To see all ties of the current configuration, press and release each input and output button, one at a time, with the Video button and the Audio button lit.

•In View-onlymode, you can view video and audio, video-only, or audio-only ties. Pressing and releasing the Video button and the Audio button toggles each selection on and off.

•When you view video and audio ties, the Video button is lit green and the

Audio button is lit red. After you select an input or output, the output buttons light different colors to show where video and audio ties are not the same (audio is broken away). Amber indicates video and audio, green indicates video only, and red indicates audio only..

•After 30 seconds of front panel inactivity, View-onlymode automatically deselects.

MTPX Plus Twisted Pair Matrix Switchers • Operation 3-19