Extron electronic MTPX Plus Series manual Example 2 Adding a tie to a set of video and audio ties

Example 2: Adding a tie to a set of video and audio ties

In the following example, a new video tie is added to the current configuration. The steps show the front panel indications that result from your action.

NThis example assumes that you have performed example 1.

1. Press and release the Esc button (figure 3-10).

Press the Esc button to clear all selections.

C O N T R O L

ENTER PRESET VIEW ESC

The button flashes once.

Figure 3-10 — Clear all selections

2. To select video only for the tie, if necessary, press and release the Video button and the Audio button (figure 3-11).

I / O

VIDEO AUDIO

Press the Video button to toggle on and off. The button lights green when selected.

Press the Audio button to toggle on and off.

The button is unlit or background illuminated when deselected.

Figure 3-11 — Select video only

3. Press and release the input 5 button (figure 3-12).

Press and release the Input 5 button.

The button lights green to indicate that video outputs can be tied to or untied from this input.

The Output 3, Output 4, and Output 8 buttons light green to indicate the video ties created in example 1.

							INPUTS
1	2	3	4	5	6	7	8

Figure 3-12 — Select an input

1 2 3 4 5 6 7 8

OUTPUTS

4. Press and release the output 1 button (figure 3-13).

Press and release the Output 1 button.

The button blinks green to indicate that only the selected video input will be tied to this output.

1	2	3	4	5	6	7	8	15 16		O
										U
										T
										P
17	18	19	20	21	22	23	24	31	32	U
										T
										S

C O N T R O L

ENTER PRESET VIEW ESC

The Enter button blinks green to indicate the need to confirm the change.

Figure 3-13 — Select the output

MTPX Plus Twisted Pair Matrix Switchers • Operation 3-15