Extron electronic MTPX Plus Series manual X1%V, X2$1X2$2 ... X2$n, EX2*X@*1VC X!nX!n+1...X!n+15Vid

View video global preset configuration

Command description: Response description:

Command/response table for SIS commands (continued)

Command	ASCII command	Response	Additional
	(host to switcher)	(switcher to host)	description
View ties, gain, volume, mutes, presets, and DIP switch status
View RGB (video) output tie	X@&	X!]
Example:	5&	12]	Input 12 RGB is tied to
			output 5.
View video output tie	X@%	X!]
Example:	7%	02]	Input 2 video is tied to output 7.
View audio output tie	X@$	X!]
Example:	3$	06]	Input 6 audio is tied to output 3.
View output volume	X1%V	X1^]
Example:	7V	55]	Volume for output 7 is 55%.
View input gain	X#G	X1*]
Example:	4G	-02]	Gain for input 4 is -2 dB.
View output mutes	EVM}	X2$1X2$2 ... X2$n]	Each X2$response is the
			mute status of an output,
			starting from output 1.
			n = the maximum number of
			outputs for this model..
Example:	EVM}	Mut0220200002202000]	Output 2, 3, 5, 10, 11, and
MTPX Plus 3216			13 audio or RS-232 are

muted. All other outputs are unmuted.

NThe “Mut” portion of the response appears only when the switcher is in Verbose mode 3. See the Verbose mode command on page 4-26

EX2)*X@*1VC} X!n•X!n+1•...•X!n+15•Vid]

Show preset X2)’s video configuration. Show the input tied to 16 sequential outputs, starting from output

X@.

preset #*starting output # (StO#)*1(=video)VC

input # (I#) tied to StO#•I# tied to StO#+1•I# tied to StO#+2• ... •I# tied to StO#+15•Vid]

NThe starting output number (X@) should always be “1” for matrix sizes of 16 outputs or smaller.

NEX2)*1*1VC}where X2)= 0 returns the switcher’s current video configuration.

Example:	E3*1*1VC}
MTPX Plus 168					input 8 tied to output 4
			input 12 tied to output 3							no tied input				outputs do not exist
	Response = tied input: 08•08•12•08•08•11•00•00•--•--•--•--•--•--•--•--•Vid
			Output:	1		2	3	4	5		6	7	8	09	10	11	12	13	14	15	16
	Each position shown in the response is an output: left = starting output (1), right =
	starting output +15 (16). (Outputs 9 through 16 are not present on the MTPX Plus 168.)
	The number in each position is the input tied to that output.
	In this example, preset 3, video input 8 is tied to outputs 1, 2, 4, and 5; input 12 is tied to
	output 3; and input 11 is tied to output 6. No inputs are tied to outputs 7 and 8.
N X@= Output number		01 – 32
X!= Input number		00 – (maximum number of inputs for your model)
X1%= Local audio output number		1	– 4 (matrix sizes 1616 and smaller)
X#= Input number		1	– 8 (matrix sizes 1632 and larger)
		01 – (maximum number of inputs for your model)
X1^= Volume adjustment range		0	– 64 (1 dB/step except for 0-to-1, which is 22 dB)
X1*= Numeric dB value		–18 to +24 (45 steps of gain or attenuation) (Default = 0 dB)
X2$= Audio or RS-232 mute:		0	= no mutes
X2)= Global or room preset #		2	= audio or RS-232 mute
		0	- 32, 10 maximum for a room preset (0 = current configuration)
	MTPX Plus Twisted Pair Matrix Switchers • Programmer’s Guide																					4-19