Extron electronic MTPX Plus Series Command/response table for SIS commands continued, Response

Command/response table for SIS commands (continued)

Command	ASCII command	Response	Additional
	(host to switcher)	(switcher to host)	description

View ties, gain, volume, mutes, presets, and DIP switch status (continued)

View Input Select DIP	EStat}	X2%1X2%2...X2%n*X*]
switch positions and level/
peaking status

Each X2%is the switch position for that rear panel Input Select DIP switch from 1 to n. n = 3 for matrix sizes up to 1616, n = 6 for matrix sizes of 1632 and larger. X* indicates whether the input level/peaking is within the pre-determined threshold for the input tied to output 1 only.

NThe response to the View File Directory command differs, depending on whether the command is sent via an

RS-232/RS-422 or Telnet connection or sent via a Web browser connection.

View file directory	EDF}	filename1,date/time,length] List user-supplied files.
RS-232/RS-422 port and		filename2,date/time,length]
Telnet		filename3,date/time,length]
		•	•
		•	•
		filenamen,date/time,length]
		# of Bytes•Left]]
View file directory	EDF}	Var file = new array ();		List user-supplied files.
Web browser		File [1] = ‘filename1,date1,filesize1‘;
		File [2] = ‘filename2,date2,filesize2‘;
		File [3] = ‘filename3,date3,filesize3‘;
		•	•
		•	•
		File [n] = ‘filenamen,daten,filesizen‘;
		File [n+1] = # of Bytes•Left
Erase user-supplied Web	EfilenameEF}	Delfilename]
pages/files
N X2%= Local input select DIP switch status		0 = RJ-45 position
X*= Threshold		1 = local input position
		0 = outside of threshold

1 = within threshold

MTPX Plus Twisted Pair Matrix Switchers • Programmer’s Guide 4-21