Extron electronic MTPX Plus Series Programmer’s Guide, cont’d, Names continued, I/O Grouping

Programmer’s Guide, cont’d

Command/response table for SIS commands (continued)

Command	ASCII command	Response	Additional
	(host to switcher)	(switcher to host)	description
Names (continued)
Write input name	EX#,X2!NI}	NmiX#,X2!]
Example:	E1,Podium camNI}	Nmi01,Podium cam]	Name input 1
			“Podium cam”.
Read input name	EX#NI}	X2!]
Write output name	EX#,X2!NO}	NmoX#,X2!]
Example:	E1,Main PJ1NO}	Nmo01,Main PJ1]	Name output 1 “Main PJ1”.
Read output name	EX#NO}	X2!]

I/O Grouping

NThe group that is assigned in each of the following I/O grouping commands (X2#) must be 1, 2, 3, 4, or 0 (not grouped).

Write input grouping	EX2#1X2#2...X2#nI}	GriX2#1X2#2X2#3...X2#n] n = the maximum number
		of inputs. Each X2#entry
		is the group number
		assigned to an input
		position, starting from input 1.
Example: MTPX Plus 168	E4013300004440443I}	See below.

Input 1 in group 4					Input 2 not grouped								Input 12 in group 4
Response #s = group: GrI	4 0 1				3 3 0 0 0 0 4							4 4 0 4 4 3
Input:	01	02	03	04		05	06	07	08	09	10		11	12	13	14	15	16

Input 1 - Group 4, Input 2 -

Group 0 (not grouped), ...

Input 16 - Group 3.

NYou must enter and X2#value for each input in your matrix size, such as 32 inputs for an MTPX Plus 3216.

Write output grouping	EX2#1X2#2...X2#nO}										GroX2#1X2#2X2#3...X2#n]									n = the maximum
																				number of outputs. Each
																				X2#entry is the group
																				number assigned to an output
																				position,startingfromoutput2.
Read input grouping	EI}										X2#1X2#2X2#3...X2#n]									n = the maximum number of
																				inputs. Each X2#entry is the
																				group number assigned to
																				an output position, starting
																				from input 1.
Example: MTPX Plus 1616 EI}											See below.
	Input 1 in group 1					Input 8 not grouped Input 12 in group 4
					3 3 0
	Response = group: 1 1 1								0 0 0 4 4 4 0 4 4 4
	Input:	01	02	03		04	05	06		07	08	09	10	11	12	13	14	15	16
Read output grouping	EO}										X2#1X2#2X2#3...X2#n]									n = the maximum number of
																				outputs.

Save, recall, and directly write presets

N• If you try to recall a preset that is not saved, the matrix switcher responds with the error code E11.

•The following characters are invalid in preset names: + - , ` @ = [ ] { } ‘ “ ; : \ and ?.

Save current configuration	X2)	X2)]		Command character is a
as a global preset	,	Spr		comma.
Example:	9,		]	Save current ties as preset 9.
		Spr9
Recall a global preset	X2)	Rpr	X2)]	Command character is a
	.			period.
Example:	5.	Rpr05]		Recall preset 5, which
				becomes the current
				configuration.

N X#= Input number	01 – (maximum number of inputs for your model)
X2!= Name	12 characters maximum for input and output names
X2#= Group #	1 through 4 groups (0 = no group
X2)= Global or room preset #	0 - 32, 10 maximum for a room preset (0 = current configuration)

4-16 MTPX Plus Twisted Pair Matrix Switchers • Programmer’s Guide