Extron electronic MTPX Plus Series manual Updating firmware

Matrix Software, cont’d

Updating firmware

The firmware upgrade utility provides a way to replace the firmware that is coded on the switcher’s control board without taking the switcher out of service.

Update the switcher firmware as follows:

1. Visit the Extron Web site, www.extron.com, click the Download Center tab, and then click the Firmware link (figure 5-9).

NOTE This sequence is shown for example only.

For the MTPX Plus,

the firmware file selected and shown is “MTPX Plus”.

1

1

2

3

3

Figure 5-9 — Location of firmware upgrade files

2.	Select the appropriate firmware file (MTPX 1616 Series) to download and click
	Download.
3.	Enter the requested personal information and then click Download to copy the
	firmware to your computer.
4.	Click Run twice (figure 5-10 on the next page). The PC downloads the
	firmware update from the Extron Web site and starts the Extron Installation
	Program to extract the firmware file.
5.	Click Next. The program extracts the firmware files and places them in a
	folder identified in the InstallShield Wizard window.

NNote the folder to which the firmware file is saved.

6. Click Finish to exit the program.

5-12 MTPX Plus Twisted Pair Matrix Switchers • Matrix Software