Extron electronic MTPX Plus Series manual Performing soft system resets resets 3, 4, and

Operation, cont’d

Performing soft system resets (resets 3, 4, and 5)

Perform a soft reset of the switcher as follows:

1.	Use an Extron Tweeker or other small screwdriver to press and hold the rear
	panel Reset button until the front panel Video and Audio buttons blink the
	number of times for the desired reset: once (events reset), twice (system reset),
	or three times (absolute reset) (figure 3-76).

Press and hold the Reset button.

(Mode 1)	RESET
Events Reset

Reset LED flashes once.

3 seconds RESET

Release, then immediately press and release again.

RESET

Front panel I/O buttons flash once.

I / O

VIDEO AUDIO

Press and hold	Reset LED flashes twice.
the Reset button.

IP Settings	RESET	6 seconds	RESET
Reset
(Mode 4)

Release, then immediately press and release again.

RESET

Front panel I/O buttons flash twice.

I / O

VIDEO AUDIO

Press and hold the Reset button.

(Mode 5)	RESET
Absolute Reset

Reset LED flashes

three times.

9 seconds RESET

Release, then immediately press and release again.

RESET

Front panel I/O buttons flash three times.

I / O

VIDEO AUDIO

Figure 3-76 — Soft system resets

2. Release the Reset button and then immediately press and release the Reset button again. Nothing happens if the second momentary press does not occur within 1 second.

3-54 MTPX Plus Twisted Pair Matrix Switchers • Operation