Extron electronic MTPX Plus Series manual Performing a hard reset reset, To the switcher figure

Performing a hard reset (reset 1)

The hard reset function restores the switcher to the base firmware that it was shipped with. After a hard reset, events do not automatically start, but user settings and files are restored.

Perform a hard reset as follows:

NThe hard reset restores the factory-installed firmware. The switcher reverts to that factory firmware the next time power is cycled off and on unless a firmware update is performed before the power cycle.

1.	If necessary, turn off power to the switcher.
2.	Press and hold the Reset button on the rear panel while you apply AC power
	to the switcher (figure 3-75).
	Press and hold the Reset button while
	you apply power to the switcher.
	RESET

The switcher flashes the front panel button indicators green, red, and amber and then turns them off.

Power

Continue to hold the Reset button until all input and output buttons return to either unlit or to background illumination and the Video and Audio buttons turn on.

Release the Reset button.

RESET

Figure 3-75 — Hard reset

MTPX Plus Twisted Pair Matrix Switchers • Operation 3-53