Extron electronic MTPX Plus Series manual Programmer’s Guide, cont’d, Lock executive modes, Resets

Zpt]

Zpk]

Zpg]

ZpgX2)]

Zpa]

Zpv]

Zpz]

Zpr]

ZprX2@]

Zpp]

ZppX2@*X2)]

Zpf]

Zpx]

Zpq]

Programmer’s Guide, cont’d

Command/response table for SIS commands (continued)

Command	ASCII command	Response	Additional
	(host to switcher)	(switcher to host)	description

Lock (executive) modes

NSee “Setting the front panel locks (Executive modes)” in chapter 3, “Operation”, for more information on the Lock modes.

Lock all front panel functions	1X	Exe1]	Enable Lock mode 1.
Lock advanced front panel	2X	Exe2]	Enable Lock mode 2.
functions
Unlock all front panel	0X	Exe0]	Enable Lock mode 0.
functions
View lock status	X	X1@]

Resets

Reset all input level and	EZT}
peaking adjustments
Reset all input and output	EZK}
skew adjustments
Reset global presets and names	EZG}
Reset one global preset	EX2)ZG}
Reset audio input levels	EZA}
Reset audio output levels	EZV}
Reset all mutes	EZZ}
Reset room map	EZR}
Reset individual room	EX2@ZR}
Reset all room presets and	EZP}
names
Reset individual room preset	EX2@*X2)ZP}
and name
Reset flash	EZFFF}
Reset whole switcher	EZXXX}
Absolute reset	EZQQQ}

Clear all level and peaking adjustments to their default

(0) values.

Clear all input and output skew values to 0 ns.

Clear all global presets and their names.

Clear global preset X2). Reset all audio input levels (gain and attenuation) to 0 dB. Reset all audio output levels (volume) to 100% (no attenuation).

Reset all audio or RS-232 mutes.

Clear all room definitions.

Delete room X2@.

Clear an individual room preset and name.

Clear an individual room preset and name.

Reset flash memory (erase all user-supplied files).

Clear all ties and presets, reset all audio gains to 0 dB, and reset volume to 100%. Similar to Reset whole switcher, plus clear the IP address to 192.168.254.254 and subnet mask to 255.255.000.000.

N X1@= Lock mode		0	= mode 0
		1	= mode 1
X2)		2	= mode 2
	= Global or room preset #	0	- 32, 10 maximum for a room preset (0 = current configuration)
X2@	= Room # (for room presets)	10 max. (each can have up to 10 presets (X2)s) assigned)

4-18 MTPX Plus Twisted Pair Matrix Switchers • Programmer’s Guide