Write room outputs
Clear a global preset’s ties Directly write a global preset

Command/response table for SIS commands (continued)

Command

ASCII command

Response

Additional

 

(host to switcher)

(switcher to host)

description

Save, recall, and directly write presets (continued)

Direct write process

NThe direct write of a global preset should always be preceded by a clear global preset ties command of that same preset number, as shown below. In a directly-written preset, each output position’s tied input (or no tied input) remains unchanged unless overwritten or cleared.

If you do not clear the ties in a global preset number before you directly write a global preset to that number, ties that are part of the previous version of the specified preset with the same number can unexpectedly become part of the newly- created preset.

E+X2)P0*!} SprX2)]

E+X2)PX!*X@!X!*X@%X!*X@$ ... X!*X@&}

SprX2)]

Example:E+27P0*!} Spr27]

Esc +27P12*5!10*09%3*2$3*8&

Spr27]

MprX2@,X@1,X@2, ... X@n] MprX2@,X@1,X@2, ... X@n]

N• A room can contain a maximum of 16 outputs (X@s).

An output can belong to only one room.

The maximum number of rooms (X2@s) is 10.

If no room name is assigned, the default name is “Room #X2@X#1,•X!2,•X@n

Example:

E8,3,04,5,6MR}

Mpr8,03,04,05,06]

Read room outputs

EX2@MR}

X2),X@1,X@2, ... X@n]

 

E3MR}

Class 1,01,02,08,09]

Recall room preset

X2@ X2)

.

Rmm

X2@•

Rpr

X2)]

 

*

 

 

Directly write a room preset

E+X2@*X2)PX!*X@!X!*X@%X!*X@$ ... X!*X@&}

 

 

 

RmmX2@•SprX2)]

Clear all ties in preset X2). The tie all (!), tie RGB (&), tie video (%), and tie audio ($) commands are all valid. Clear all ties in preset 27.

Brackets are shown to separate ties for clarity only. Create global preset 27, which ties video and audio input 12 to output 5, video input 10 to output 9, audio input 3 to output 2, and video input 3 to output 8.

See notes.

Outputs 3, 4, 5, and 6 are assigned to room 8.

Outputs 1, 2, 8, and 9 are

assigned to room 3, which named “Class 1”. Command character is a period.

Enter as many ties as are valid for this model. Tie all (!), tie RGB (&), tie video (%), and tie audio ($) commands are all valid.

Example:

Esc+7*3P12*7&11*5$4*5%6*6!

Rmm07Spr03]

Brackets are shown to separate ties for clarity only. Create preset 3 for room 7, which ties audio input 12 to output 7, video input 11 to output 5, RGB input 4 to output 5, and video and audio input 6 to output 6.

N X2)= Global or room preset #

0 - 32, 10 maximum for a room preset (0 = current configuration)

X!= Input number

00 – (maximum number of inputs for your model)

X@= Output number

00 – (maximum number of inputs for your model)

X2@= Room # (for room presets)

10 max. (each can have up to 10 presets (X2)s) assigned)

MTPX Plus Twisted Pair Matrix Switchers • Programmer’s Guide 4-17

Page 111
Image 111
Extron electronic MTPX Plus Series manual +X2P0*! SprX2 +X2PX!*X@!X!*X@%X!*X@$ ... X!*X@, Direct write process