Extron electronic MTPX Plus Series manual Extron Name/Descriptor field, Gateway IP address field

Matrix Software, cont’d

Extron Name/Descriptor field

The Extron Name/Descriptor field contains the name used as the “from” information when the MTPX Plus switcher e-mails notification of its failed or repaired status. This descriptor can be changed to any valid name, up to 12 alphanumeric characters.

NThe following characters are invalid in the Extron Name/Descriptor field:

{space} + ~ , @ = ‘ [ ] { } < > ’ “ ; : \ and ?.

Edit this field as follows:

1.	Click in the Extron name/descriptor field. The graphic cursor becomes a text
	cursor.
2.	Edit the name as desired.
3.	Press the Tab key on the keyboard or click in another field to exit the Extron
	Name/Descriptor field.
4.	Click the Take button to make the name change take effect.

Gateway IP address field

The Gateway IP Address field identifies the address of the gateway to the mail server to be used if the MTPX Plus switcher and the mail server are not on the same subnet.

Valid IP addresses consist of four 1-, 2-, or 3-digit numeric octets separated by dots (periods). Each field can be numbered from 000 through 255. Leading zeroes, up to three digits total per field, are optional. Values of 256 and above are invalid.

Edit this field as follows:

1.	Click in the Gateway IP Address field. The graphic cursor becomes a text
	cursor.
2.	Edit the address as desired.
3.	Press the Tab key on the keyboard or click in another field to exit the Gateway
	IP Address field.
4.	Click the Take button to make the address change take affect.

Subnet Mask field

The Subnet Mask field is used to determine whether the MTPX Plus switcher is on the same subnet as the controlling PC or the mail server when you are subnetting. For more information, see “Subnetting — A Primer”, in appendix A, “Ethernet Connection”.

Edit this field as follows:

1.	Click in the Subnet Mask field. The graphic cursor becomes a text cursor.
2.	Edit the mask as desired.
3.	Press the Tab key on the keyboard or click in another field to exit the Subnet
	Mask field.
4.	Click the Take button to make the mask take affect.

Hardware Address field

The hardware address is hardcoded in the MTPX Plus switcher and cannot be changed.

5-8 MTPX Plus Twisted Pair Matrix Switchers • Matrix Software