Extron electronic MTPX Plus Series Programmer’s Guide, cont’d, Command, ASCII command, Response

View audio room preset configuration

Command description: Response description:

Command description: Response description:

View audio global preset configuration

Command description: Response description:

Programmer’s Guide, cont’d

Command/response table for SIS commands (continued)

Command	ASCII command	Response	Additional
	(host to switcher)	(switcher to host)	description

View ties, gain, volume, mutes, presets, and DIP switch status (continued)

EX2)*X@*2VC} X!n•X!n+1•...•X!n+15•Aud]

Show preset X2)’s audio configuration. Show the input tied to 16 sequential outputs, starting from output

X@.

preset #*starting output # (StO#)*2(=audio)VC

input # (I#) tied to StO#•I# tied to StO#+1•I# tied to StO#+2• ... •I# tied to StO#15•Aud]

NThe starting output number (X@) should always be “1” for matrix sizes of 16 outputs or smaller. N EX2)*1*2VC}where X2)= 0 returns the switcher’s current audio configuration.

Example:

(MTPX Plus 1632)

View video room preset configuration

E15*17*2VC}

input 1 tied to output 3 no tied input

Response = tied input: 01•01•01•01•02•12•12•00•00•00•00•00•01•08•15•16•Aud

Output: 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Each position shown in the response is an output: left = starting output (17), right = starting output +15 (32). The number in each position is the input tied to that output.

In this example, preset 15, audio input 1 is tied to outputs 17, 18, 19, 20, and 29; input 2 is tied to output 21; input 12 is tied to outputs 22 and 23; input 8 is tied to output 30; input 15 is tied to output 31; and input 16 is tied to output 32. No input is tied to output 24, 25, 26, 27, and 28.

EX2@*X2)*1*1VC} X!n•X!n+1•...•X!n+15•Vid]

Show room X2@, preset X2)’s video configuration. Show the input tied to up to 16 outputs assigned to room

X2@.

room #*room preset #*starting output # (StO#)*1(=video)VC

input # (I#) tied to StO•I# tied to StO#+1•I# tied to StO#+2• ... •I# tied to StO#+15•Vid]

NThe starting output number (X@) should always be “1” for matrix sizes of 16 outputs or smaller.

EX2@*X2)*1*2VC} X!n•X!n+1•...•X!n+15•Aud]

Show room X2@, preset X2)’s audio configuration. Show the input tied to up to 16 outputs assigned to room

X2@.

room #*room preset #*starting output # (StO#)*2(=audio)VC

input # (I#) tied to StO•I# tied to StO#+1•I# tied to StO#+2• ... •I# tied to StO#+15•Aud]

NThe starting output number (X@) should always be “1” for matrix sizes of 16 outputs or smaller.

N X2)= Global or room preset #	0 - 32, 10 maximum for a room preset (0 = current configuration)
X@= Output number	01 – 32
X!= Input number	00 – (maximum number of inputs for your model)
X2@= Room # (for room presets)	10 max. (each can have up to 10 presets (X2)s) assigned)

4-20 MTPX Plus Twisted Pair Matrix Switchers • Programmer’s Guide