Extron electronic MTPX Plus Series manual Optimizing the Audio, Video Adjustments, Troubleshooting

Optimizing the Audio

Each local input’s audio level can be adjusted within a range of -18 dB to +24 dB, so there are no noticeable volume differences between sources and for the best headroom and signal-to-noise ratio. Each local audio output’s volume can be adjusted from full loudness to effectively muted. Adjust the levels as follows:

1.	Connect audio sources to all desired inputs and connect the local audio
	outputs to output devices such as audio players. See “Signal inputs”, in
	chapter 2, “Installation”. For best results, wire all of the inputs and the
	outputs balanced.
2.	Power on the audio sources, the switcher, and the audio players.
3.	Switch among the inputs (see “Creating a configuration”, in this chapter),
	listening to the audio with a critical ear or measuring the output audio level
	with test equipment, such as a VU meter.
4.	As necessary, adjust the input audio level of each input (see “Viewing and
	adjusting the TP input audio level”, on page 3-34) so that the approximate
	output level is the same for all selected inputs.
5.	Tie an audio input to each local audio output.
6.	As necessary, adjust the output audio level of each output (see “Viewing and
	adjusting the local output volume”, on page 3-40).

Video Adjustments

Image adjustments are available via SIS commands, the Windows-based control program, and the built-in HTML pages. See “Optimizing the Video”, in chapter 5, “Matrix Software”.

Troubleshooting

This section gives recommendations on what to do if you have problems operating the switcher.

1.	Ensure that all devices are plugged in and powered on. The switcher is
	receiving power if one of the front panel Power Supply LEDs is lit green.
2.	Check to see if one or more outputs are muted.
3.	Ensure an active input is selected for output on the switcher.
4.	Ensure that the proper signal format is supplied.
5.	Check the cabling and make corrections as necessary.
6.	Call the Extron S3 Sales & Technical Support Hotline if necessary. See the rear
	cover of this manual for the phone number in your region of the world.

MTPX Plus Twisted Pair Matrix Switchers • Operation 3-55