Operation
Customization 3
Display Line Group Selection
Click on the Group’s DOWN arrow key and select another group from the drop down list by clicking on it. Each group on the drop down list will bring up a different Display Line List. Refer to Table
Selecting an Item and Placing It
Use the mouse to move an item from the Display Line List to a Display. With the mouse, place the mouse cursor on the item. Press and hold the left key down. The item is now “grabbed” as indicated by the rectangle shown around the display line. Drag the item using the mouse. When you have moved it to display line you want, drop it by releasing the mouse button.
Changing a Line on a Display
To change a line on a Display, use the select and move operations described above to place an item on a Display.
When an item replaces a line on a Display, the Customization software immediately sends the information to the Model 35040 Therapy Dosimeter. In this manner, the Customization software always reflects the current appearance of the Displays. Any line on any display may be changed as often as required.
Using the APPEND, DELETE, and INSERT Buttons
Within the Measurement Displays Form you may remove any Display in the instrument. Also, you may add or insert a Display in the instrument. During these operations, different Displays will appear. A maximum of four (4) displays can be viewed at any time. To see other Displays, use the vertical scroll bar in the Display Frame to scroll up and down the Display list.
APPEND
If you want to add a Display to the end of the Displays, click on APPEND button. The Displays area of the dialog box shows the new Display. You may customize the lines as described above. Append adds one Display only.
NOTE
Upon selecting Append, the Customization software tells the Model 35040 Therapy Dosimeter to append a display with, initially, two Blank Lines and a Charge measurement.
DELETE
If you want to remove a Display, click on the DELETE button. The Customization software prompts you for the Display’s number. Enter a valid Display number and press OK (if you make an invalid entry, the program beeps). The Display is removed. To abort the Delete operation, press CANCEL.
NOTE
Upon completing the deletion, the Customization software tells the Model 35040 Therapy Dosimeter to delete the Display you specified.
INSERT
If you want to insert a Display, click on the INSERT button. The Customization software prompts you for the Display’s number ahead of which to insert a new Display. Enter a valid Display number and press OK (if you make an invalid entry, the program beeps). The Display is inserted. You may customize the lines as described above. To abort the Insert operation, press CANCEL.
