GB

2

Freecom FSG-3 Storage Gateway

2.4 MacOS 8.6 or 9.x

Beginning with Macintosh Operating System 7, TCP/IP is already installed on the Macintosh. On each networked Macintosh, you will need to configure TCP/IP to use DHCP.

1.From the Apple menu, select Control Panels, then TCP/IP. The TCP/IP Control Panel opens:

2.From the "Connect via" box, select your Macintosh’s Ethernet interface.

3.From the "Configure" box, select Using DHCP Server. You can leave the DHCP Client ID box empty.

4.Close the TCP/IP Control Panel.

5.Repeat this for each Macintosh on your network.

2.5 MacOS X

Beginning with Macintosh Operating System 7, TCP/IP is already installed on the Macintosh. On each networked Macintosh, you will need to configure TCP/IP to use DHCP.

1.From the Apple menu, choose System Preferences, then Network.

2.If not already selected, select Built-in Ethernet in the Configure list.

3.If not already selected, Select Using DHCP in the TCP/IP tab.

4.Click Save.

16

Page 16
Image 16
Freecom Technologies FSG-3 manual MacOS 8.6 or