Fuji Labs ZSP instruction manual Func

8.7.1Current time setting

Set the current time and day of the week.

Press the FUNC key in the measuring status.

The AUTO CAL LED of the function indicating lamps will flicker.

The main indication shows the hour and minute via a 24-hour indication and the decimal point flickers. A’–’ bar lights up at the relevant weekday on the sub indication.

Indication	SU MO TU WE TH	FR	SA
Day	Sun. Mon. Tue. Wed. Thu.	Fri.	Sat.

Press the key and the time is now settable.

The highest two digits of the main indication will flicker.

The numeric value is incremented by pressing the ‘ ’.

Press the key and the digit can be selected.

After the time setting, press key and the day is settable on the sub indication.

The bar indication will flicker.

Press the key and the bar will shift.

Press the ENT key when the time and day setting is fin- ished. The data are saved.

Time starts from the point where ENT key is pressed.

FUNC

SU	TU	TH	SA
NO
MO WE FR
Flickers			AUTO CAL
(			)
SU	TU	TH	SA

NO

MO WE FR

( )

SU TU TH SA

NO

MO WE FR

ENT

SU TU TH SA

NO

MO WE FR

– 20 –