8.7.2Auto calibration start time setting
When FUNC key is pressed at the current time indica-
tion, the auto calibration start time and day will appear on the main and sub indications.
The AUTO CALLED of the function indicating lamps will flicker. In the case of start time, the decimal point on the main indication will light steadily.
Press the 
key and the auto calibration start time is settable, so set a start time on the main indication.
The numeric value is incremented by pressing the 
key.
Press the 
key and the digit can be selected.
After setting the calibration start time, press the 
key and the calibration start day can be set on the sub indica- tion.
The bar indication will flicker.
Press the 
key and the bar will shift.
The auto calibration start time is settable up to one week ahead.
When the auto calibration start time and day have been set, press the ENT key. The data are saved.
When the auto calibration at the set time is fin- ished, the next auto calibration start time will be set automatically.
To confirm the next auto calibration start time, then carry out this operation and check the indication.
SU TU TH SA
NO
MO WE FR
Lights
FUNC
SU TU TH SA
NO
MO WE FR
AUTO CAL
()
SU TU TH SA
NO
MO WE FR
( )
SU TU TH SA
NO
MO WE FR
ENT
SU TU TH SA
NO
MO WE FR
Note: When the auto calibration start time has been set, then set the auto calibration cycle.
– 21 –
