6.Wipe the Brake roller unit using a lint free cloth moistened with cleaner F1.

Brake roller

3

CARE DAILY

ATTENTION

It may take long before the cleaner vaporizes if a large quantity is used. When cleaning the scanner parts, dampen a cloth with modest quantities of the cleaner. In addition, wipe off the cleaner completely with a soft lint-free cloth to leave no residue on the surface of the cleaned parts.

7.Re-install the Brake roller unit in the reverse order of its removal. By holding the bail toward you, put the Brake roller into bracket and rotate down until it locks in.

8.Install the Guide plate in the reverse order of the removal. By pressing the Guide plate down, and pushing the Guide plate back, you can install it smoothly.

9.Lower the ADF upper sheet guide carefully.

10.Lift the Upper transport unit to release the safety lock, then lower the unit carefully and push the unit to close it completely.

3.3 Cleaning the Rollers 3-17