2.Wipe and clean the whole transport path using a cloth moistened with cleaner F1.

 

 

 

Vacuum the transport path if there are paper dust in the path.

 

 

 

 

HINT

 

Do not use aerosol sprays to clean the path.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Do not use HIgh Pressure Air to blow dust out of the scanner. This will con-

 

 

 

CAUTION

taminate the optics and mechanism.

 

 

 

 

 

 

Transport path

3

CARE DAILY

ATTENTION

It may take long before the cleaner vaporizes if a large quantity is used. When cleaning the scanner parts, dampen a cloth with modest quantities of the cleaner. In addition, wipe off the cleaner completely with a soft lint-free cloth to leave no residue on the surface of the cleaned parts.

3.Lift the Upper transport unit to release the safety lock, then lower the unit carefully and push the unit to close it completely.

3.4 Cleaning the Transport Path 3-23