Fujitsu fi-4860C2 9.1 Basic Product Specifications, 9.1 Basic Product Specifications

9.1 Basic Product Specifications

1	Scanner Type		ADF(Automatic Document Feeder)	-
			and Manual feed
2	Image sensor		Color CCD x 2	Front/Back
3	Light source		White fluorescent lamp x 2	Front/Back
4	Scanning area	Minimum	74 mm x 74 mm, 2.9 in. x 2.9 in.	-
		Maximum	A3 or 11x17 in.	-
5	Document thickness		52 g/m2 to 127 g/m2 or 14 lb to 34 lb	(* 1)
6	Scanning speed	Binary (Black and	Simplex 60 ppm	200dpi
	(A4 Portrait/Letter	White)	Duplex 120 ipm
	Portrait)
		Grayscale	Simplex 60 ppm	200dpi
	(* 2)
			Duplex 120 ipm
		Color	Simplex 60 ppm	150 dpi (* 3)
			Duplex 120 ipm	200 dpi (* 3)
7	ADF capacity (* 4)		500 sheets	A4 80 g/m2, or
				Letter 20 lb
8	Optical resolution		400 dpi	-
9	Output resolution	Binary (Black and	100, 150, 200, 240, 300, 400 dpi	-
		White)
		Grayscale	100, 150, 200, 240, 300, 400 dpi	-
		Color	100, 150, 200, 300, 400 dpi	(* 5)-
10	Grayscale level		8 bits	10 bits
				internal
11	Output mode of halftone patterns		Dither/Error diffusion	-
12	Interface (* 6)		Ultra Wide SCSI	Shielded, 68
				pin half density
				(High Density
				DB68)
13	Other functions		JPEG compression	-

(* 1)For details, refer to “Chapter 6 ADF DOCUMENT SPECIFICATIONS” on page 6-1.

(* 2)The scanning speed is the maximum speed of the scanner hardware. The actual speed may be slower due to the system overhead such as data transfer time.

(* 3 )With JPEG enabled

(* 4)The maximum capacity varies depending on the document thickness. Refer to “Chapter 6 ADF DOCUMENT SPECIFICATIONS” on page 6-1.

(* 5)A3 and 11 x17in document sizes are not supported at color 400dpi.

(* 6)Avoid connecting other SCSI devices to the same bus. It can reduces the scaner throughput.

9-2 9.1 Basic Product Specifications